4091 Omni Mic Lo-Sens P48
- excellent for percussion
- natural and open sound
- handles high sound pressure levels with ease
The DPA 4091 is a high quality omnidirectional condenser microphone. Due to its uniquely natural and open sound the 4091 is suitable for instrument miking applications in the studio or on the stage.
The 144 dB SPL handling means it can meet just about any challenge including miking an electric guitar amp. An excellent microphone for percussion instruments the 4091 is also an ideal choice for wind and string instruments. Due to their remarkably linear frequency response in the 20 Hz to 20 kHz range sound system engineers can also use these mics for sound system alignment testing and tuning.
The rugged and compact design features a 5.4 mm diameter pre-polarized condenser capsule in a tapered body measuring just 12 cm (4.76 in).
The 4091 Low Sensitivity Omnidirectional Condenser Microphone from DPA features a professional, highly sensitive omnidirectional condenser design for capturing vocals, instruments, and ambiance in professional recording and sound reinforcement applications. This sensitive miniature omnidirectional capsule reproduces audio in clear detail without noise or distortion. Additionally, the microphone's contoured frequency response allows for use with guitar, piano, drum overheads, and sound reinforcement measuring. The package includes a microphone clip and a windscreen.
- Low Sensitivity
- The low sensitivity transducer handles up to 144 dB SPL, providing headroom for loud sound sources such as guitar and bass cabinets.
- Omnidirectional Polar Pattern
- The omnidirectional polar pattern reproduces at an even, uniform polar pattern suitable for ambiance and measurement applications.
- Wide Frequency Response
- A wide frequency response results in rich detail and accurate audio reproduction.
Specifications
| Operating Principle | Pressure Operated |
| Transducer | Condenser |
| Diaphragm | 0.21" (5.4 mm) |
| Polar Pattern | Omnidirectional |
| Frequency Range | 20 Hz to 20 kHz |
| Signal to Noise Ratio | 68 dB A-Weighted |
| Equivalent Noise Level | 26 dB A-Weighted 38 dB ITU-R 468 |
| Maximum SPL | 144 dB SPL |
| Impedance | 40 ohms |
| Sensitivity | -44.5 dB @ 1 kHz, re: 1 V/Pa |
| Power Requirements | 48 V+/- 4 V |
| Output Connectors | 3-Pin XLR |
| CMMR | 40 dB |
| Operating Relative Humidity | 90% |
| Operating Temperature | -40 to 113°F (-40.00 to 45.00°C) |
| Operating Current Consumption | 2.0mA |
| Dynamic Range | 97 dB |
| THD | < 1.0% up to 123 dB SPL Peak |
| General | |
|---|---|
| Length | 4.80" (122 mm) |
| Diameter | 0.75" (19 mm) |
| Weight | 1.34 oz (38 g) |
| Packaging Info | |
|---|---|
| Package Weight | 2.0 lb |
| Box Dimensions (LxWxH) | 10.0 x 6.0 x 3.0" |
