DPA Microphones 2011A

DPA Microphones 2011A

DPA Microphones 2011A

DPA Microphones 2011A

Twin Diaphragm Cardioid Microphone

SKU: DPA-2011A
MSRP: $1,090.00
MAP: $1,090.00

2011A Twin Diaphragm Cardioid Microphone

  • Twin-Diaphragm-Capsule and interference tube technologies
  • Superb stage separation and level control
  • Modular flexibility

All-round workhorse

The new DPA 2011A microphone has strong references to the acclaimed close-miking and hi-SPL handling specialist DPA 4011 cardioid microphone – not only by its type number 11 also in its all-round capture abilities.

2011 is primarily optimized for on-stage use and the technology combines the new Twin Diaphragm Capsule and DPA’s strong know-how within interference tube technology.

While 4011 has gained worldwide admiration for its total linearity at all sound confrontations the 2011 is purposely aimed differently; the off-axis response is still linear but in a smaller frequency bandwidth making stage separation and gain-to-feedback higher and mic level easier to control.

Modular flexibility

2011A is part of the flexible DPA d:dicate Recording Mics series. The 2011A with the MMP-A preamplifier is the audiophile’s choice with low distortion and total accurate and faithful sound where the 2011C with the MMP-C compact preamplifier offers a subtle character alteration with a bit more “body” to the low end – in addition to its easier-to-position approach.

At any time and with no tools necessary it is possible to transform the basic 2011 microphone into a new configuration by combining it with another DPA microphone capsule or preamp.

Twin Diaphragm Capsule: cutting edge technology

The overall distinctive sound image from the DPA miniatures is so well balanced that it meets the high demands of the DPA Reference Standard league.

In a 2011 capsule two opposite facing miniature capsules are custom re-built into a double diaphragm one-capsule composition.

The use and control of interference tubes has become a DPA specialty and the 2011 is no exception; the capsules are loaded to the supreme Reference Standard preamps instead of the tiny miniature FET preamp from the 4060 miniature series offering even more air and precision.

Stage addict

The 2011 has found its use on numerous stages and recording sessions.  Exhibiting a previously unheard blend of clarity richness and dynamic range the 2011 performs like a much more exclusive microphone and redefines the term value for money.

When used for stereo recording

Please read this note regarding the acoustic center of the MMC2011 capsule.

Also available as selected stereo pair

The ST2011A stereo pair is supplied in a specially designed PeliTM Case.

 

 

The 2011A Twin Diaphragm Cardioid Microphone from DPA features a modular capsule design and sonic character. It contains a cardioid condenser capsule suitable for capturing instruments in sound reinforcement applications. The capsule's twin diaphragm is designed to provide a fast impulse response and large frequency bandwidth, resulting in lower inherent noise. Additionally, the microphone allows you to maintain a linear tonal response when closely positioning it near speaker cabinets, percussion, and other instruments. The microphone's modular design allows users to manually switch optional capsules, providing enhanced versatility and performance. There is an output stage that offers an MMP-A preamp for faithful recreations of the original source material and an included microphone clip and windscreen.

Blends clarity, richness, and dynamics

Twin-Diaphragm-Capsule and interference tube technologies

Maximum stage separation and level control

Modular flexibility

Specifications

Operating Principle

Pressure Gradient

Transducer

Condenser

Polar Pattern

Cardioid

Frequency Range

20 Hz to 20 kHz

Signal to Noise Ratio

74 dB A-Weighted

Equivalent Noise Level

20 dB A-Weighted
33 dB ITU-R 468

Maximum SPL

153 dB SPL

Impedance

200

Load Impedance

2 kOhms

Sensitivity

-40 dB @ 1 kHz, re: 1 V/Pa

Power Requirements

48 V

Pad

Yes, 20 dB

Output Connectors

3-Pin XLR

CMMR

60 dB

Operating Relative Humidity

90%

Operating Temperature

-40 to 113?