Numark M4 Black

Numark M4 Black

Numark M4 Black

Numark M4 Black

Three-Channel Scratch Mixer

SKU: NUM-M4BLACKXUS
MSRP: $199.00
MAP: $159.00

M4 is a three-channel tabletop mixer designed for any DJ who needs maximum flexibility. It features a replaceable crossfader with reverse and slope controls a 1/4" microphone input with EQ and plenty of routing for phono and line level devices.

Where M4 really shines is its impressive input section. Two switchable phono/line inputs plus four more dedicated line inputs give you a total of SIX inputs! Add Master and Record outputs and steep three-band EQ/rotary kills on each channel and you've a powerhouse package that's ready to handle whatever the gig throws at you.

M4 has the inputs controls and features to turn what would be a problem for the average mixer into a simple plug-in. Don't get stuck without enough inputs at your next gig.

Key Features:

  • Three-channel tabletop mixer
    Inputs: two phono/line switchable (RCA) four line (RCA) mic (1/4 inch)
  • Outputs: Master (RCA) Record (RCA) headphone (1/4 inch stereo)
    Steep three-band EQ/rotary kills on each channel
  • Microphone input with EQ
  • Six-segment LED display for monitoring signal strength
  • Toggle for master and PFL metering
  • Replaceable crossfader with reverse and slope controls

 

SPECIFICATIONS

M4 DJ Mixer

  • Line input: 10Kohm input impedance; 80mV RMS sensitivity for 0dB output
  • Mic input: 600ohm input impedance unbalanced; 1.5mV RMS sensitivity for 0dB output; 400mV RMS max input
  • Phono input: 47Kohm input impedance; 1.3mV RMS sensitivity @ 1kHz for 0dB output
  • Line outputs: 7V RMS max
  • Headphone ouputs: 0.5W into 47ohm
  • Channel fader kill: Better than 90dB at 1kHz
  • Crossfader kill: Better than 75dB
  • Crosstalk: Better than 80dB at 1kHz
  • Distortion: Less than 0.05%
  • Signal-to-Noise ratio (maximum output JIS-A weighted):
  • Line: Better than 100dB
  • Mic: Better than 95dB
  • Phono: Better than 85dB
  • Frequency response:
  • Line: 20 — 20,000Hz ±0.5dB
  • Mic: 20 — 15,000Hz ±0.5dB
  • Phono: ±1dB; -3dB attenuation at 20Hz to reduce rumble and feedback
  • Channel equalizer:
  • Bass: +12 / -35dB at 20Hz
  • Mid: +12 / -25dB at 1.3kHz
  • Treble: +12 / -20dB at 15kHz