Overview

The Turtle-KRM33 is an ultra-compact and low-profile powered wedge speaker with a controlled horizontal pattern and has an extended frequency response. The KRM33 is equipped with a two-channel amplifier and a DSP that can be used to adjust the EQ directly inside the box. An USB direct connection guarantees an easy plug & play connection. The DSP also offers the possibility of changing the horizontal pattern of the single speaker and its bass response, two buttons located at the back of the box are used to quickly change these settings without the need of a computer.

Features

Visually Discreet
For architectural reasons, a visually discreet audio system may be required to integrate seamlessly with the layout without compromising sound quality.

Weather Resistant
We utilize the most durable and resistant materials when developing our products to protect and conserve the system regardless of the elements, rendering a K-array installation reliable and long-lasting.

Color Customizable
We have the ability to customize your project by color matching your system to any RAL code to help you to better integrate the speakers into a wide variety of venues. 

Specifications

Acoustics

• Power Handling: 180W (AES)
• Frequency range: 70 Hz – 18 KHz +/- 3dB (1) / 100 Hz – 18 KHz +/- 3dB (2)
• SPL 1W/1mt: 93 db
• Maximum SPL: 115dB (cont) - 121dB (peak)

Coverage

• Horizontal: DSP controlled (30° / 70° selectable)
• Vertical: 90°

Crossover

• Type: DSP Controlled
• Frequency: 70 Hz minimum (preset dependent)

Transducers

• Type: 3 X 3,15” neodymiun cone driver with 1” voice coil
• Type: 1 X 6” passive radiator

Selection Switch

• Horizontal: pattern Spot – Flood
• Response: Bass Enhancer

Audio input

• Analog: Connector 1 male + 1 female 3-pin balanced XLR

Remote Control input

• Connector: 1 USB type B

Power input

• Connector: 2 x PowerCon IN/OUT

Amplifier

• Type: 1 Class D module - DSP controlled
• Nominal Output: Power 2 X 125 W @ 4 Ω 1% THD + NOISE
• Protection: Dynamic limiter - Over current - Short circuit
• Frequency response: 20 Hz – 20 kHz (+0 -1 dB) for 1 W @ 8 Ω
• Damping factor: 8Ω, 100Hz >500
• THD+N 1KHz, 1 W 0.003%

AC Power

• Nominal voltage: 115 / 230 Vac auto switching
• Operating range: 85 – 132 Vac 170 – 264 Vac 50 – 60 Hz
• I. Nom 2 A / 115 Vac 1 A / 230 Vac

Consumption 85 – 265 Vac

• Quiescent power (with no signal in): 10 W
• 1/8 rated power (pink noise) @ 4 Ω 110 W
• Peak power: 660 W / 120 ms

Certifications

• IP: 40

Physical Overview

• Dimensions: 26.6 x 10.3 x 30.0 cm (10.47” x 4.05” x 11.81”) (3)
• Weight: 5.2 Kg (11.46 lb)