Overview

For podium or stylish floor stand applications, the MMP-F preamp series is available in different lengths and gooseneck choices. All equipped with state-of-the-art preamp design and sleek appearance, they fit any d:dicate modular capsule. Excellent radio frequency rejection is obtained through the DPA designed impedance balancing with active drive.

Specifications

• Output connector
• XLR-3M
• Pin 1: shield
• Pin 2: signal + phase
• Pin 3: - phase
• Low-cut frequency
• -3dB: 15Hz
• Noise with shorted input
• A-weighted: 0.6muV
• Output voltage
• RMS: 2.2V
• Peak: 3.1V
• Type of electronic circuit: Active
• THD: < 0.2 % at 1VRMS, 1kHz
• Dynamic range: 131dB
• Output impedance: 100Ohms
• Minimum load impedance: 2kOhms
• Current consumption: 3.5mA
• Output balance principle: Impedance balancing
• Common Mode Rejection Ratio (CMRR): > 40dB
• Power supply: 48V Phantom power (+/-4V)
• Cable drive capability: 328' / 99.98m
• Filters
• High Boost: +4dB at 8kHz
• Low cut: First order filter, below 120Hz
• Temperature range: -40 to 45 deg. C / -40 to 113 deg. F