Overview

• 1RU 8-Port Fiber Transport Interface Devices
• Seamlessly transports, routes and distributes audio, video, intercom and control data over one fiber optic cable
• Full integration into SANE, DiViNe and Optocore network
• SD/HD/3G-SDI capacity
• 8 SD/HD/3G-SDI ports
• 4 simplex LC fiber ports
• CWDM (Coarse Wavelength Division Multiplexing) module
• Tri/Bi-level video clock input and output module
• Optocore module
• 2 x Optocore 2Gbps ports
• 2 x SANE/LAN ports
• 2 x LAN ports
• 4 x RS485/422 ports
• Word Clock I/O
• Redundant power supplies
• Full control with ProGrid control software
• LAN, USB and RS232 ports for configuration

Specifications

Intercom Ports

• Connector: 4-wire Clear-Com standard; 4 x input, 4 x output RJ45, Clear-Com convention

Optical Link

• Connection: Duplex LC
• Protocol: Optocore
• Transmission: Full Duplex
• Fiber Cable Lengths: Standard singlemode transceiver <10 km; Special singlemode transceiver < 80 km (on request)
• SANE, LAN ports
• Auxiliary Ports
• Convention EIA / TIA-485
• Data channels: Digital control data; 4
• Data rate: Up to 10 Mbps
• Impedance: Termination; 330 Ω; Source; ≤ 10 Ω

Video

• Standards: SD, ED, HD, Dual Link, 3G
• Complies with SMPTE: 259M, 292M, 344M, 372M, 424M
• Interface: SDI – Serial Digital Interface

Word Clock

• Hardware standard
• BNC – 75 Ω
• Data Rate: Dependent on sample rate; Up to 192 kHz
• Impedance: Output ≤ 5 Ω; Input 75 Ω
• Drive Level: Output; ≥ 1 Vpp
• Zero Level: Referring to GND; +1.7 V
• Sense Level: Input; ≥ 400 mVpp

Optical Connection

• Complies with 21 CFR 1040.10 and 1040.11

Remote Control

• RS232: EIA / TIA – 232; 57 600 Baud
• USB: USB 2.0 – Device; 12 Mbit/s
• LAN: IEEE – 802.3; 10/100 Mbit/s

Power Supply

• Type: Switch-mode, universal input
• Main Voltage: 100-240 V; 50-60 Hz
• Frequency: 50-60 Hz
• Cooling: Passive, via surface and ventilation openings on both sides of the device

Dimensions

• 19 in. W x 1.73 in. H x 7.87 in. D
• (483mm x 43.94mm x 199.9mm)

Weight

• 6.6 lbs (3.0 KG)

Features

 MUX-22 Series
The MUX-22 Series is a set of fiber interfaces that distributes multiple professional video and audio signals, such as SD/HD/3G-SDI over the same optical fiber.
The MUX-22 Series panels offer eight SD/HD/3G-SDI coaxial video inputs or outputs that are converted to and from single-mode optical fiber links. It is equipped with a CWDM (Coarse Wavelength Division Multiplexing) module with auxiliary fiber ports to allow for connection of external fiber systems, to the CWDM module.
The ProGrid audio and data transport seamlessly multiplexes with the MUX-22 Series fiber. Audio and control data from Clear-Com user panels or matrices are sent transparently through the optical network. Each intercom channel can be routed to and from every device on the network using the Optocore Control software. The devices can also be used with other BroaMan units as part of a larger routing solution.